CAD/BIM Catalog

Our BIM content is available as individual families for Revit and templates for both Revit and Fabrication CADmep. The template files contain all pipes and fittings of each specific product line. These can be found on the right side of the screen when accessing the product line’s page.

MultiCAD Cart (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information
AquaRise pipe is manufactured to Iron Pipe Size Outside Diameter (IPS OD) Standard Dimension Ratio (SDR)11 dimensions. Pipe is made in 10 ft. lengths and is available in nominal sizes 1/2" – 4". All sizes have the same pressure rating while providing larger inside diameters than most potable water systems.
  • Maximum operating temperature of Aquarise used in Potable Water Piping System shall not exceed 160˚F.
Unit of Measure

Specifications

Type

 N/A Pipe

Size (in)

 N/A 2 1/2
Material1 N/A TempRite® CPVC

Pressure Rating

 N/A 150 psi at 160°F 400 psi at 73°F

Standards/Certifications

 N/A CSA B137.6, ASTM F442, NSF 14 & 61

Weight per Length

 N/A 1.583 lb/ft
  • 1 TempRite® is a registered trademark of Lubrizol Advanced Materials, Inc.

Find what you need?

Whether you are new to thermoplastic solutions or a long-standing customer your local Customer Service and in-field Technical Sales Representatives provide the support you need. It's this service that distinguishes IPEX in the marketplace.

Ask an Expert Find a sales representative
Back to top