Our BIM content is available as individual families for Revit and templates for both Revit and Fabrication CADmep. The template files contain all pipes and fittings of each specific product line. These can be found on the right side of the screen when accessing the product line’s page.
Single Apartment Fitting H x Sp x H
Apartment Fittings
The IPEX Single PVC Apartment Fitting consists of a spigot and hub main fitting tee pipe, a sanitary tee (hub), and two side inlets (hubs) at a 90° angle between each other. These side inlets are located above the sanitary tee banch and oriented with a 45° angle offset with reference to the sanitary tee.
- When tested to the CAN/ULC S102.2 Standard, System XFR achieved a Flame Spread Rating of not greater than 25 and a Smoke Developed Classification of not greater than 50
- Meets National and Provincial Building Codes for high buildings, air plenums, noncombustible construction and penetrating a rate fire separation
- High impact strength in cold temperatures, exceeding CSA requirements
- Improved flow rates
- Lower thermal conductivity can reduce or eliminate the need for insulation
