CAD/BIM Catalog

Our BIM content is available as individual families for Revit and templates for both Revit and Fabrication CADmep. The template files contain all pipes and fittings of each specific product line. These can be found on the right side of the screen when accessing the product line’s page.

MultiCAD Cart (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information Add to CAD Cart
Adapter - 1/2’’ IPS Spigot to 1/2’’ CTS Spigot

Provides a transition between AquaRise IPS and CPVC CTS dimensions in a hot and cold water piping system. This transition adapter offers a low-cost, permanent joint alternative to the existing threaded brass adapter.
  • Maximum operating temperature of Aquarise used in Potable Water Piping System shall not exceed 160˚F.
Unit of Measure

Specifications

Type

 N/A CTS Adapter

Size (in)

 N/A 1/2
Material1 N/A TempRite® CPVC

Connection Type

 N/A AquaRise IPS Socket x CTS Spigot

Pressure Rating

 N/A 150 psi at 160°F 400 psi at 73°F

Standards/Certifications

 N/A ASTM F438 CSA B137.6 NSF 61

Weight

 N/A 0.024 lb
  • 1 TempRite® is a registered trademark of Lubrizol Advanced Materials, Inc.

Find what you need?

Whether you are new to thermoplastic solutions or a long-standing customer your local Customer Service and in-field Technical Sales Representatives provide the support you need. It's this service that distinguishes IPEX in the marketplace.

Ask an Expert Find a sales representative
Back to top