CAD/BIM Catalog

Our BIM content is available as individual families for Revit and templates for both Revit and Fabrication CADmep. The template files contain all pipes and fittings of each specific product line. These can be found on the right side of the screen when accessing the product line’s page.

MultiCAD Cart (0)
  • Cart is empty
2 1/2’’ SDR21 COLD WATER AQUARISE PIPE

AquaRise Cold Water pipe is made for cold water use only and manufactured to Iron Pipe Size Outside Diameter (IPS OD) Standard Dimension Ratio (SDR 21). The thinner pipe wall for cold water use only offers a lighter weight, economical alternative to traditional SDR 11. It can be used with SDR 11 AquaRise fittings to create a complete piping system.
  • Maximum operating temperature of Aquarise used in Potable Water Piping System shall not exceed 160˚F.
Unit of Measure

Specifications

Type

N/A Pipe

Size (in)

N/A 2 1/2
Material1 N/A TempRite® CPVC

Pressure Rating

N/A 400 psi at 73°F

Standards/Certifications

N/A ASTM F442 CAN/ULC S102.2 CSA B137.6

Weight per Length

N/A 0.825 lb/ft
  • 1 TempRite® is a registered trademark of Lubrizol Advanced Materials, Inc.

Find what you need?

Whether you are new to thermoplastic solutions or a long-standing customer your local Customer Service and in-field Technical Sales Representatives provide the support you need. It's this service that distinguishes IPEX in the marketplace.

Back to top