Our BIM content is available as individual families for Revit and templates for both Revit and Fabrication CADmep. The template files contain all pipes and fittings of each specific product line. These can be found on the right side of the screen when accessing the product line’s page.
P-Traps
p-traps
P-Trap Solvent Weld H x H
(4) Made for connections beneath a floor or roof drain to a tall piece using pipe and adapters.- When tested to the CAN/ULC S102.2 Standard, System XFR achieved a Flame Spread Rating of not greater than 25 and a Smoke Developed Classification of not greater than 50
- Meets National and Provincial Building Codes for high buildings, air plenums, noncombustible construction and penetrating a rate fire separation
- High impact strength in cold temperatures, exceeding CSA requirements
- Improved flow rates
- Lower thermal conductivity can reduce or eliminate the need for insulation
P-Trap Solvent Weld with Cleanout H x H
(2) Made for a connection to a vertical strainer tail pipe under a sink, the p-trap with Cleanout provides a horizontal transition to the DWV piping system while traping water in the lower half of the p-trap u-bend for preventing the release of sewer gas into the environment through the sink drain. Access for cleaning is provided by a cleanout plug with a reusable watertight gasket.- When tested to the CAN/ULC S102.2 Standard, System XFR achieved a Flame Spread Rating of not greater than 25 and a Smoke Developed Classification of not greater than 50
- Meets National and Provincial Building Codes for high buildings, air plenums, noncombustible construction and penetrating a rate fire separation
- High impact strength in cold temperatures, exceeding CSA requirements
- Improved flow rates
- Lower thermal conductivity can reduce or eliminate the need for insulation
P-Trap Union Connection H x H
(2) Installed under a bathroom or kitchen sink to prevent sewer gas from entering a building, the U-Bend is connected to the sink tail piece using an adapter sized to match the tail pipe of a System XFR system. The 90 degree portion is screwed to the U-Bend and directed towards the rest of the drainage line.- When tested to the CAN/ULC S102.2 Standard, System XFR achieved a Flame Spread Rating of not greater than 25 and a Smoke Developed Classification of not greater than 50
- Meets National and Provincial Building Codes for high buildings, air plenums, noncombustible construction and penetrating a rate fire separation
- High impact strength in cold temperatures, exceeding CSA requirements
- Improved flow rates
- Lower thermal conductivity can reduce or eliminate the need for insulation
Trap Union Connection with Cleanout H x H
Made for a connection to a vertical strainer tail pipe under a sink, the p-trap with union connection with Cleanout provides a horizontal transition to the DWV piping system while traping water in the lower half of the p-trap u-bend for preventing the release of sewer gas into the environment through the sink drain. A union connection to the u-bend and a cleanout plug with a reusable watertight gasket allow for cleaning of the p-trap.- When tested to the CAN/ULC S102.2 Standard, System XFR achieved a Flame Spread Rating of not greater than 25 and a Smoke Developed Classification of not greater than 50
- Meets National and Provincial Building Codes for high buildings, air plenums, noncombustible construction and penetrating a rate fire separation
- High impact strength in cold temperatures, exceeding CSA requirements
- Improved flow rates
- Lower thermal conductivity can reduce or eliminate the need for insulation
P-Trap Primer Tee H x H x FPT
(2) Prevents sewer gases from entering and moving within a building’s plumbing system. As water is exposed to the air, it is subject to evaporation over time in irregularly used floor drains; this leads to the release of sewer gas into the environment. The P-Trap Primer Connection Tee will mitigate this issue by adding Municipal water into the P-Trap to maintain a water seal that will protect a room or building from spreading sewer gases.- Easy to install
- Compact design; Lightweight
- Long-term performance
- National Pipe Thread (NPT) water line connection
- Fire Rated, Flame and Smoke CAN/ULC S102.2
- CSA approved, CSA B181.2
