CAD/BIM Catalog

Our BIM content is available as individual families for Revit and templates for both Revit and Fabrication CADmep. The template files contain all pipes and fittings of each specific product line. These can be found on the right side of the screen when accessing the product line’s page.

MultiCAD Cart (0) ▾
  • Cart is empty
  1. Request CAD files
Creates a 22.5-degree bend in your System XFR piping run, using hub ends for connection to spigot pipe or fittings.
  • When tested to the CAN/ULC S102.2 Standard, System XFR achieved a Flame Spread Rating of not greater than 25 and a Smoke Developed Classification of not greater than 50
  • Meets National and Provincial Building Codes for high buildings, air plenums, noncombustible construction and penetrating a rate fire separation
  • High impact strength in cold temperatures, exceeding CSA requirements
  • Improved flow rates
  • Lower thermal conductivity can reduce or eliminate the need for insulation
Request Information Add to CAD Cart
Unit of Measure
Items
22-1/2º Elbow H x H

System XFR PVC - Elbow 22 1/2º (Hub x Hub)
22-1/2º Elbow H x H

System XFR PVC - Elbow 22 1/2º (Hub x Hub)
22-1/2º Elbow H x H

System XFR PVC - Elbow 22 1/2º (Hub x Hub)
22-1/2º Elbow H x H

System XFR PVC - Elbow 22 1/2º (Hub x Hub)
22-1/2º Elbow H x H

System XFR PVC - Elbow 22 1/2º (Hub x Hub)
Size 1 N/A 1 1/2 N/A 2 N/A 3 N/A 4 N/A 6
Size 2 N/A 1 1/2 N/A 2 N/A 3 N/A 4 N/A 6
Angle N/A 22 1/2 º
Leg Length N/A 0.30 in N/A 0.63 in N/A 0.80 in N/A 1.01 in N/A 1.46 in
Leg Length 2 N/A 0.28 in N/A 0.63 in N/A 0.84 in N/A 1.00 in N/A 1.46 in
Weight N/A 0.110 lb N/A 0.187 lb N/A 0.653 lb N/A 1.107 lb N/A 3.113 lb

Find what you need?

Whether you are new to thermoplastic solutions or a long-standing customer your local Customer Service and in-field Technical Sales Representatives provide the support you need. It's this service that distinguishes IPEX in the marketplace.

Ask an Expert Find a sales representative
Back to top