CAD/BIM Catalog

Our BIM content is available as individual families for Revit and templates for both Revit and Fabrication CADmep. The template files contain all pipes and fittings of each specific product line. These can be found on the right side of the screen when accessing the product line’s page.

MultiCAD Cart (0)
  • Cart is empty
AquaRise molded caps are available in 1/2" to 4" sizes, and make a temporary or permanent terminating connection in AquaRise piping systems.
  • Maximum operating temperature of Aquarise used in Potable Water Piping System shall not exceed 160˚F.
Unit of Measure

Specifications

Type

N/A Cap

Size (in)

N/A 2
Material1 N/A TempRite® CPVC

Connection Type

N/A AquaRise Soc

Pressure Rating

N/A 150 psi at 160°F 400 psi at 73°F

Standards/Certifications

N/A CSA B137.6, ASTM F439, NSF 14 & 61

Weight

N/A 0.260 lb
  • 1 TempRite® is a registered trademark of Lubrizol Advanced Materials, Inc.

Find what you need?

Whether you are new to thermoplastic solutions or a long-standing customer your local Customer Service and in-field Technical Sales Representatives provide the support you need. It's this service that distinguishes IPEX in the marketplace.

Back to top