CAD/BIM Catalog

CAD (0) ▾
  • Cart is empty
  1. Request CAD files
  • 90º Elbow H x H
Creates a 90-degree bend in your System XFR piping run. Includes hub ends for connection to spigot pipe or fittings.
  • When tested to the CAN/ULC S102.2 Standard, System XFR achieved a Flame Spread Rating of not greater than 25 and a Smoke Developed Classification of not greater than 50
  • Meets National and Provincial Building Codes for high buildings, air plenums, noncombustible construction and penetrating a rate fire separation
  • High impact strength in cold temperatures, exceeding CSA requirements
  • Improved flow rates
  • Lower thermal conductivity can reduce or eliminate the need for insulation
1 - 14 of 14 | Results Per Page | View | Unit of Measure
1 
Request Information Compare Items Add to CAD Cart

Item #

Size 1

Size 2

BIM

N/A 1 1/2 N/A 1 1/2 N/A Revit Icon (for items table)
N/A 1 1/2 N/A 1 1/2 N/A Revit Icon (for items table)
N/A 2 N/A 2 N/A Revit Icon (for items table)
N/A 2 N/A 2 N/A Revit Icon (for items table)
N/A 3 N/A 3 N/A Revit Icon (for items table)
N/A 3 N/A 3 N/A Revit Icon (for items table)
N/A 4 N/A 4 N/A Revit Icon (for items table)
N/A 6 N/A 6 N/A Revit Icon (for items table)
N/A 8 N/A 8 N/A Revit Icon (for items table)
N/A 10 N/A 10 N/A Revit Icon (for items table)
N/A 12 N/A 12 N/A Revit Icon (for items table)
N/A 14 N/A 14 N/A Revit Icon (for items table)
N/A 16 N/A 16 N/A Revit Icon (for items table)
N/A 18 N/A 18 N/A Revit Icon (for items table)
1 - 14 of 14 | Results Per Page | View | Unit of Measure
1 

Find what you need?

Whether you are new to thermoplastic solutions or a long-standing customer your local Customer Service and in-field Technical Sales Representatives provide the support you need. It's this service that distinguishes IPEX in the marketplace.

Ask an Expert Find a sales representative
Back to top